To Create User ID:

1-Open Zeoniq, and then go to [System] Category.
-Look at [Security], which is the red box below shown.
Click on it. 

2-Select [POS User]. 

3-You will see the page as below. 

4-Click on the [paper] button on the top right corner to enter.

4.1-Insert the designated ID in [POS User ID]. In the sample is 1234. 

4.2-Enter the designated Username and password.

Re-key the same password that you had set.

4.3-Do untick [Request Password Change].

4.4-Insert [Short Name]. It could be same as your Username as well.

4.5-Select [POS Group ID] by clicking the dropdown button at the right side.

-It will pop out [POS Group] as shown below.

a)      4.5.1- Cashier – Can do order and payment.

b)      4.5.2- Waiter – Only can-do order.

c)      4.5.3- Admin – have all the access.

5-Select the designated group that you need and click the [tick].

6-This will be the final look before save. 

-Click on the [Save] Icon on the top right corner, the red box shown above to save.

To Cancel:

7-Click on the [back] button on the top right corner. 

8-It will pop out a message, click [Yes] to unsaved. Click [No] to continue edit. 

To change password:

9-Select the User that you want to change password. Click on number at the [POS User ID] to enter.

10-Click on the [reset password] on the top right corner. 

11-It will pop out the tab as shown below.

-Insert the designated password and click [tick] button to save.

To inactive user:

12-Select the User that you wanted to inactive. Click on number at the [POS User ID] to enter. 

13-Scroll down all the way down to the bottom and see the [Inactive] box.

14-Tick on [Inactive] and click [Save] icon, as shown below.